Sliding gates
Fence
02 · Fence

Sliding gates

Sliding gates with automatic or manual opening. They also work in snow, leaves and sand.

  • 01Suitable where the distance between the garage and the gate is short
  • 02Can be installed in an existing fence
  • 03Infill and colour can be matched to the fence from the RAL catalogue
  • 04Drive built into a steel post, protected from the weather and theft
Configurator

Let's build your gate

Your choices are not binding. Once we receive your request, we will prepare a quote and, if needed, come to take measurements.

01 — DesignMODERN
02 — ColourRAL 5010
Matt standard colours. Colours on screen are approximate.
03 — AccessoriesNone selected
04 — Dimensions0 / 2
If you don't know the dimensions, leave them blank — we will come and measure.
Specifications

Construction

Construction
Self-supporting, load-bearing element on a foundation with anchor bolts
Door leaf
Steel profile sections or bars, a few cm above the ground
Guide rail
95 × 85 mm, galvanised metal
Power supply
24 V or 230 V
Safety
Photocells, overload switch, warning lamp, rubber edge
In a power cut
Can be released and opened manually

A sliding gate is a modern, convenient solution for fencing your home. We offer automatic (with a remote control system) and manual (by hand) opening options. The design guarantees stable operation of the gate even in adverse weather: in snow, leaves and sand. Sliding gates are also ideal for yards where the distance between the garage and the fence gate is short. A sliding gate can also be installed in an existing fence. The type of infill and the colour from the RAL chart are easy to match to any metal, timber or other type of fence.

Sliding gates with automation

Motor in the column: safety, convenience and aesthetics. Housing the automation in a steel column on WIŚNIOWSKI sliding gates is currently the only solution of its kind on the market. Automation installed on the outside of the gate can often become easy prey for thieves or spoil the look of the fence, so it is worth ordering a gate with built-in automation. The column protects the mechanism from the adverse effects of the external environment. In the event of a power cut, the automation can easily be released and the gate opened manually.

Sliding gates with automation

Sliding gates with manual and automatic electronic control

Main features:

  • The sliding gate is self-supporting; the bearing unit is mounted on the foundation and secured with foundation bolts
  • The gate leaf runs several centimetres above the ground, so it operates reliably and does not jam
  • Depending on the chosen design, the gate leaf is made of steel profile sections or bars
  • A 95x85 mm bearing rail is attached to the gate leaf. The rails are made of galvanised metal using zero-waste technology. This unique production process for one of the most important components of a sliding gate ensures flawless, smooth and quiet operation of the gate
  • Roller carriage in the rail: 95x85 mm
  • The gate can be installed on two or three foundation bolt anchors
Sliding gates with manual and automatic electronic control

Photocells stop the gate and return it to the open position if an obstacle appears in the driveway.

Sliding gates

The protective cover guards against the weather, mechanical damage and theft.

Sliding gates

Automatic closing shuts the gate after a programmed time. If you forget to close the gate when driving out or in, the automation will do it for you.

Sliding gates

Gate supply voltage of 24V or 230V: if it is damaged, the power cable does not endanger human life or health.

Sliding gates

A signal lamp shows whether the gate is closed or open.

Sliding gates

The overload switch makes the gate stop and return to its previous position if the gate leaf meets an obstacle while closing. In addition, a rubber strip at the end of the leaf protects against damage on contact with an obstacle (for example, a car).

Sliding gates